1900 Belt Clip - The Serial POD add an external serial device and charging point to the case. The serial POD only works with newer model HP iPAQs which have the standard 22 pin connector on the bottom. The POD installs in place of the rubber plug on the bottom of the 1900. Null modem style serial devices (GPS, survey equipment, etc.) can be connected to the PDA through the DB9 serial connection on the POD. The POD can also be used to sync the PDA when used with a null modem adapter. A 4mm power jack is incorporated into the POD so that the PDA may be charged using the standard HP iPAQ AC adapter without removing it from the case. The connections are fully protected from the environment and an integrated cap can be used to cover the connections when they are not in use

1900 Medium POD - The Scanner POD allows for the use of CF and SD scanner devices while providing full environmental and impact protection. The POD has a hardened, scratch-resistant lens for the scanner to operate through which allows for 99% transmission of the laser light. The Scanner POD allows for users to operate barcode reader devices in the harshest of environments without worrying about damaging expensive equipment.

1900 Large POD - The Large POD allows for the use of larger GPS devices and other sizable CF and SD accessories while providing full environmental and impact protection. The Large POD installs in place of the standard 1900 POD lid and provides additional room inside the case to allow for GPS devices to be installed directly into the PDA while still being enclosed in the case. The Large POD allows for users to operate GPS devices in the harshest of environments without worrying about damaging expensive equipment.

1900 Medium POD with Scan Window - The Serial POD add an external serial device and charging point to the case. The serial POD only works with newer model HP iPAQs which have the standard 22 pin connector on the bottom. The POD installs in place of the rubber plug on the bottom of the 1900. Null modem style serial devices (GPS, survey equipment, etc.) can be connected to the PDA through the DB9 serial connection on the POD. The POD can also be used to sync the PDA when used with a null modem adapter. A 4mm power jack is incorporated into the POD so that the PDA may be charged using the standard HP iPAQ AC adapter without removing it from the case. The connections are fully protected from the environment and an integrated cap can be used to cover the connections when they are not in use.

1900 Serial POD - The Serial POD add an external serial device and charging point to the case. The serial POD only works with newer model HP iPAQs which have the standard 22 pin connector on the bottom. The POD installs in place of the rubber plug on the bottom of the 1900. Null modem style serial devices (GPS, survey equipment, etc.) can be connected to the PDA through the DB9 serial connection on the POD. The POD can also be used to sync the PDA when used with a null modem adapter. A 4mm power jack is incorporated into the POD so that the PDA may be charged using the standard HP iPAQ AC adapter without removing it from the case. The connections are fully protected from the environment and an integrated cap can be used to cover the connections when they are not in use.

1900 Neck Lanyard Kit - The Neck Lanyard Kit provides a comfortable solution for all day use. The kit consists of a high quality neoprene neck strap which easily attaches to the back of the case.

1900 Screen Replacement Kit - The screen replacement kit allows you to easily replace a damaged or scratched screen saver in the 1900 PDA case. This kit includes 3 screen savers, 1 hex wrench, and 2 extra screws. The kit only replaces the flexible screen membranes, not the hard screen cover.

1900 Vehicle Mount Adapter - Compatible with RAM B-size mounts (requires RAM 1" ball Mount on back). Can also be used for your own custom mounting solutions.

1900 Dash Mount Kit - allows you to mount your 1900 PDA case onto any flat surface (requires drilling 3 holes). The kit includes a heavy duty, shock-absorbing, adjustable mount which allows you to position your PDA in the best location and protect it from vibration. Includes mount and all necessary hardware.

1900 Handlebar Mount Kit - allows you to mount your 1900 PDA case onto motorcycles, bicycles, ATV's, or any vehicle with up to a 1.0" handlebar. The kit includes a heavy duty, shock-absorbing, adjustable mount which allows you to position your PDA in the best location and protect it from vibration. The PDA case is held securely while being easily and completely removable from the mount. Includes mount and all necessary hardware.

1900 Suction Mount Kit - allows you to mount your 1900 PDA case onto windshields, boats, or any smooth surface. The kit includes a heavy duty, shock-absorbing, adjustable mount and a 3.25" (82mm) suction cup with release lever. Includes mount and all necessary hardware.

Cable Pass-Through Kit -allows for multiple sizes of cables for power, sync, GPS, printers, etc. to pass through the case and connect to your PDA. Includes built-in strain relief (pulling on cables does not damage the PDA). This kit rated as water-resistant, not water proof and is not submersible with this kit attached.